Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HELP!

#1
I am an absolute newbie to mechanical keyboards.  I'm not a gamer.  I have no interest in the RGB aspects.  I bought the DK61 for many reasons, but primarily for it's keyboard programming function (hardware macros) and it's bluetooth wireless functionality.
The manual is over my head.  The driver software is likewise: just too much.
Is there a primitive "Quick guide", set-up tutorial, basic instructions?
Maybe to start, just instructions on how get a Bluetooth pair and start using it as a wireless keyboard?

I expect to come to like all the bells and whistles, but right now I just want to turn it on and USE it!

HELP!

WINDOWS 10 Velocity Micro PC.
Reply

#2
56HLoaches


Hi,thank you for contacting us.As you mentioned before that you want to pair the Bluetooth,right? But our Dk61 don't support the Bluetooth.Maybe there is some wrong .Or whether have you kept the DK61 or DK61 pro ?Because only DK61 pro support the Bluetooth.
Reply

#3
Victoria,
You are correct. I was wrong. I purchased and am having problem pairing the Bluetooth with the DK61 Pro.
Reply

#4
i got that ,first you need to open your PC and keyboard Bluetooth, then you can Press key: "FN+Q/W/E" to connect the Bluetooth device, (Press "FN+ Q/W/E" for 6 seconds long, the Bluetooth is in the pairing status, the indicator light is flashing. Short press FN+Q/W/E, the Bluetooth keyboard enters the reconnecting status, the indicator light slowly flashes. you can press the R key to change the wired and Bluetooth mode.
Reply

#5
(01-21-2020, 02:25 AM)Victoria Liao Wrote: i got that ,first you need to open your PC and keyboard Bluetooth, then you can Press key: "FN+Q/W/E" to connect the Bluetooth device, (Press "FN+ Q/W/E" for 6 seconds long, the Bluetooth is in the pairing status, the indicator light is flashing. Short press FN+Q/W/E, the Bluetooth keyboard enters the reconnecting status, the indicator light slowly flashes. you can press the R key to change the wired and Bluetooth mode.
Thank-you Victoria.  I will try this, but it will now take nearly 24 hours for me to respond as I must step away from computing and deal with "real life" matters :-)
I appreciate your quick response and will do the same when I am able.
Kevin
Reply

#6
(01-21-2020, 02:31 AM)56Loaches Wrote:
(01-21-2020, 02:25 AM)Victoria Liao Wrote: i got that ,first you need to open your PC and keyboard Bluetooth, then you can Press key: "FN+Q/W/E" to connect the Bluetooth device, (Press "FN+ Q/W/E" for 6 seconds long, the Bluetooth is in the pairing status, the indicator light is flashing. Short press FN+Q/W/E, the Bluetooth keyboard enters the reconnecting status, the indicator light slowly flashes. you can press the R key to change the wired and Bluetooth mode.
Thank-you Victoria.  I will try this, but it will now take nearly 24 hours for me to respond as I must step away from computing and deal with "real life" matters :-)
I appreciate your quick response and will do the same when I am able.
Kevin
Bluetooth issues fixed,  NOW, about macros.  The interface is very archaic as I can see.  I can not edit lines in any manner but to delete them (and can not then replace them.)  At any attempt to complete and save I get some warning about a "missing release key".
Ideas?
Reply

#7
(01-23-2020, 04:57 PM)56Loaches Wrote: Hi,
(01-21-2020, 02:25 AM)Victoria Liao Wrote: i got that ,first you need to open your PC and keyboard Bluetooth, then you can Press key: "FN+Q/W/E" to connect the Bluetooth device, (Press "FN+ Q/W/E" for 6 seconds long, the Bluetooth is in the pairing status, the indicator light is flashing. Short press FN+Q/W/E, the Bluetooth keyboard enters the reconnecting status, the indicator light slowly flashes. you can press the R key to change the wired and Bluetooth mode.
Thank-you Victoria.  I will try this, but it will now take nearly 24 hours for me to respond as I must step away from computing and deal with "real life" matters :-)
I appreciate your quick response and will do the same when I am able.
Kevin

Bluetooth issues fixed,  NOW, about macros.  The interface is very archaic as I can see.  I can not edit lines in any manner but to delete them (and can not then replace them.)  At any attempt to complete and save I get some warning about a "missing release key".
Ideas?

Hi,do you want to program the macro? our software for macro is normal and can be used,maybe theres is any wrong during the procece your use,you can go to our youtube social media or our kemovebbs.com,there have some video about how to use the software.
Reply

#8
Hello Victoria and Thanks for responding.
First, the tutorials are about as confusing as the software itself. I say that as a retiree first experiencing this kind of keyboard. I suppose many younger users can make the mental leaps needed to understand. I can not. Your marketing etc. may be scaring away many like me who are trying to expand their knowledge, but need a little hand holding.
That said, it surprises me that such a sophisticated keyboard has such an elementary macro program.
I encourage you to expand and revise it.
The ability to edit a completed macro is CRITICAL. Right now, if you make simple error, you have to start over!
Being able to edit the microsecond timing between keystrokes is also critical. The current method of deleting the current value and adding another DEFAULT and unchangeable value is ...not good.
I find it , also, counter-intuitive that I need to APPLY and then SAVE, when typically, SAVE is the only necessary keystroke.

Thank-you for your time.
Kevin
Reply

#9
Elocon Drugs Crullyunpalp where to buy cialis cheap Effogy Viagra Au Maroc Acheter
Reply

#10
Одновременно с этим существует и другая сторона формирования и организации высказывания.
Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)

Forum software by © MyBB Theme © iAndrew 2016